Label the Back-End CablesDell Compellent 93Label the Back-End CablesLabel the back‐end cables that connect controllers to enclosures to indicate the chainnumber and side (A or B). Pre‐made labels are provided for SC200/220 enclosures. Labelsare not provided for EN‐SASx6x12/24 enclosures, so labels must be created manually forcables that connect to those enclosures.PrerequisitesIf the Storage Center has EN‐SASx6x12/24 enclosures, you must have a label maker, or fourblank labels and a writing utensil.Steps1 Locate or create labels for the back‐end cables. EN‐SASx6x12/24 enclosures: Create labels that label the purpose (Backend), chainnumber, and side (A or B).Example: Backend 1A SC200/220 enclosures: Locate the back‐end cable labels that shipped with theenclosures. The pre‐made labels include the purpose (Backend), chain number, andside (A or B).Figure 85. SC200/220 Back-End Cable LabelNote: Cables that connect one enclosure to another do not need to be labeled.
