Chapter 5 Set up the Storage Center Software146 Storage Center SC8000 Controller Deployment GuideConfigure IO CardsThe Configure IO Cards page appears if the Storage Center detects iSCSI IO cards. Use thispage to configure network settings for iSCSI IO cards.1 (Optional) Click Skip iSCSI IO Card Configuration to configure network settings forthe iSCSI IO cards later. The Configure Ports page appears.2 For each iSCSI IO card that is used, complete the IP Address, a Subnet Mask, andGateway fields. Uninitialized iSCSI IO cards have an IP Address of 0.0.0.0 and will belisted on a warnings page in the next step.3 When you are finished, click Continue. If no messages are generated, iSCSI IO card configuration is saved and theConfigure Ports page appears. If there are issues, a message appears. Click No to go back and correct the IP Address, Subnet Mask, and/or Gatewayaddress for cards that generated errors and/or warnings. Click Yes to ignore the message and continue. The Configure Ports page appears.Note: Dell Compellent recommends that you configure iSCSI IO cards duringsetup.
