Setting Up a Home and Office Network 49Setting Up a Home and Office NetworkConnecting to a Network AdapterBefore you connect your computer to a network, the computer must have a network adapter installedand a network cable connected to it.To connect a network cable:NOTE: Plug the network cable into the network adapter connector on the computer. Do not plug the networkcable into the modem connector on the computer. Do not plug a network cable into a telephone wall jack.1 Connect the network cable to the network adapter connector on the back of your computer.Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.2 Connect the other end of the network cable to a network device.Network Setup WizardThe Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide youthrough the process of sharing files, printers, or an Internet connection between computers in a homeor small office.1 Click the Start button, point to All Programs→ Accessories→ Communications, and then clickNetwork Setup Wizard.book.book Page 49 Thursday, September 22, 2005 8:08 AM
