Steps1. Remove the screw (M2x3.5) that secures the M.2 2280 solid-state drive to the system board2. Slide and lift the M.2 2280 solid-state drive off the solid-state drive slot (M.2 PCIe SSD 1) on the system board.Installing the M.2 2280 solid-state drivePrerequisitesIf you are replacing a component, remove the existing component before performing the installation process.About this taskNOTE: This procedure is only applicable if you are installing an M.2 2280 solid-state drive into the solid-state drive slot (M.2PCIe SSD 1) on the system board.The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of theinstallation procedure.Removing and installing Customer Replaceable Units (CRUs) 41

Dell VH0W5 Owner's Manual