Table 36. System setup options—System Management menu (continued)System ManagementWake on LAN/WLAN Enable or disable the computer to power on by special LAN signals when itreceives a wakeup signal from the WLAN.By default, the Disabled option is selected.Auto on Time Enable to set the computer to turn on automatically every day or on apreselected date and time. This option can be configured only if the Auto OnTime is set to Everyday, Weekdays, or Selected Days.By default, the option is disabled.Intel AMT CapabilityEnable Intel AMT Capability Enable or disable the Intel AMT capabilty.By default, the Restrict MEBx Access option is enabled.MEBx Hotkey Enable or disable MEBx hotkey.By default, the option is disabled.USB ProvisionEnable USB Provision Enable or disable the Intel AMT provisioning using the local provisioning filethrough a USB storage device.By default, the option is disabled.SERR Messages Enable or disable SERR messages.By default, the option is enabled.First Power On Date Set ownership dateBy default, the option is disabled.Diagnostics Enables OS agent request to schedule onboard diagnostics.By default, the option is enabled.Power-On-Self-Test AutomaticRecoveryEnables automatic recovery when the computer becomes unresponsibe whenperforming a BIOS Power-On-Self-Test (POST). This may revert BIOS settingsto a recoverable state.By default, the option is enabled.Table 37. System setup options—Keyboard menuKeyboardKeyboard ErrorsEnable Keyboard Error Detection Enable or disable the keyboard error detection.By default, the option is enabled.Numlock LEDEnable Numlock LED Enable or disable Numlock LED.By default, the option is enabled.Device Configuration Hotkey AccessDevice Configuration Hotkey Access Enable or disable users to access device configuration by using hotkeys.By default, the option is enabled.88 BIOS setup