Removing the antenna module (white cable)Prerequisites1. Follow the procedure in Before working inside your computer.2. Remove the side cover.3. Remove the hard drive, if applicable.About this taskThe following image(s) indicate the location of the antenna module (white cable) and provides a visual representation of theremoval procedure.Steps1. Remove the antenna cable from the routing guides on the chassis and system board.2. Remove the screw (M3x3) that secures the antenna module (white cable) to the chassis.3. Listen the captive screw that secures the antenna module (white cable) to the chassis.4. Push the antenna module (white cable) through the slot on the chassis.5. Lift the antenna module (white cable) off the chassis.Removing and installing Field Replaceable Units (FRUs) 73