Dell VH0W5 Owner's Manual
Also see for D15U: Setup and specificationsService manualService manualService manualInstallation guide
                                                                                                  |
System-diagnostic lightsThis section lists the system-diagnostic lights of your OptiPlex Micro 7010.Table 43. System-diagnostic lightsBlinking patternProblem description Suggested resolutionAmber White1 1 TPM detection failure Replace the system board.1 2 Unrecoverable SPI FlashFailure Replace the system board.1 5 EC unable to program i-Fuse Replace the system board.1 6 Generic catch-all forungraceful EC code flowerrorsDisconnect all power source(AC, battery, coin cell) anddrain flea power by pressingand holding down powerbutton for 3~5 seconds.2 1 CPU failure ● Run the Dell SupportAssist/Dell Diagnosticstool.● If problem persists,replace the system board.2 2 System board failure (includedBIOS corruption or ROMerror)● Flash latest BIOS version● If problem persists,replace the system board.2 3 No memory/RAM detected ● Confirm that the memorymodule is installedproperly.● If problem persists,replace the memorymodule.2 4 Memory/RAM failure ● Reset and swap memorymodules among the slots.● If problem persists,replace the memorymodule.2 5 Invalid memory installed ● Reset and swap memorymodules among the slots.● If problem persists,replace the memorymodule.2 6 System board/Chipset Error Replace the system board.2 7 LCD failure (SBIOS message) Replace the LCD module.2 8 LCD failure (EC detection ofpower rail failure) Replace the system board.3 1 CMOS battery failure ● Reset the main batteryconnection.● If problem persists,replace the main battery.3 2 PCI or Video card/chip failure Replace the system board.Troubleshooting 95 |
Related manuals for Dell D15U
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine