SpeakersRemoving the speakersPrerequisites1. Follow the procedure in Before working on your thin client.2. Remove the stand.3. Remove the back cover.About this taskThe following image indicates the location of speakers and provides a visual representation of the removal procedure:Steps1. Disconnect the speaker cable from the system board.2. Remove the speaker cable from the routing guide on the VESA-mount bracket.3. Note the speaker-cable routing on the display bezel and remove the screw (M3x5) that secures the cable to the middle frame.4. Peel off the tape from the VESA-mount bracket.5. Lift the speakers, along with the speaker cable, off the display assembly.Installing the speakersPrerequisitesIf you are replacing a component, remove the existing component before performing the installation procedure.About this taskThe following image indicates the location of the speakers and provides a visual representation of the installation procedure.Removing and installing components 35