Dell XC Core XC760 Installation And Service Manual

Table 13. Processor Settings details (continued)Option DescriptionUMA Based Clustering This field is read-only and shows as Quadrant when the Sub NUMA Cluster is disabled, ordisplays as Disabled, when Sub NUMA Cluster is either 2-way or 4-way.UPI Prefetch Enables you to get the memory read started early on DDR bus. The Ultra Path Interconnect(UPI) Rx path spawns the speculative memory that is read to Integrated MemoryController (iMC) directly. This option is set to Enabled by default.XPT Prefetch This option is set to Enabled by default.LLC Prefetch Enables or disables the LLC Prefetch on all threads. This option is set to Enabled bydefault.Dead Line LLC Alloc Enables or disables the Dead Line LLC Alloc. This option is set to Enabled by default. Youcan enable this option to enter the dead lines in LLC or disable the option to not enter thedead lines in LLC.Directory AtoS Enables or disables the Directory AtoS. AtoS optimization reduces remote read latenciesfor repeat read accesses without intervening writes. This option is set to Disabled bydefault.AVX P1 Enables you to reconfigure the processor TDP levels during POST based on the power andthermal delivery capabilities of the system. TDP verifies the maximum heat that the coolingsystem must dissipate. This option is set to Normal by default.NOTE: This option is only available on certain processor SKUs.Intel SST-BF Enables Intel SST-BF. This option is displayed if Performance Per Watt (operating system)or Custom (when OSPM is enabled) system profiles are selected. This option is set toDisabled by default.Intel SST-CP Enables Intel SST-CP. This option displays if Performance Per Watt (operatingsystem) or Custom (when OSPM is enabled) system profiles are selected. This optionis displayed and selectable for each system profile mode. This option is set to Disabled bydefault.NOTE: This option is hidden if the processor installed does not support SSTcapabilities.x2APIC Mode Enables or disables x2APIC mode. This option is set to Enabled by default.NOTE: For two processors with a 64 core configuration, x2APIC mode is notswitchable if 256 threads are enabled (BIOS settings: All CCD, cores, and logicalprocessors are enabled).AVX ICCP Pre-GrantLicenseEnables or disables AVX ICCP Pre-Grant License. This option is set to Disabled by default.Table 14. Dell Controlled TurboOption DescriptionDell Controlled TurboSettingsControls the turbo engagement. Enable this option only when System Profile is set toPerformance or Custom, and CPU Power Management is set to Performance. This itemcan be selected for each system profile mode. This option is set to Disabled by default.NOTE: Depending on the number of installed processors, there might be up to twoprocessor listings.Dell AVX ScalingTechnologyEnables you to configure the Dell AVX scaling technology. This option is set to 0 by default.Enter the value from 0 to 12 bins. When the Dell-controlled Turbo feature is enabled, thevalue that is entered decreases the Dell AVX Scaling Technology frequency.Optimizer Mode Enables or disables the CPU performance. When this option is set to Auto, set the CPUPower Management to Max Performance. When set to Enabled, enables the CPU PowerManagement settings. When set to Disabled, the CPU Power Management option isdisabled. This option is set to Auto by default.26 Pre-operating system management applications