Dell XC Core XC760 Installation And Service Manual

Installing a drive blankPrerequisites1. Follow the safety guidelines listed in the Safety instructions.2. If installed, remove the front bezel.StepsSlide the drive blank into the drive slot until the release button clicks into place.Figure 42. Installing a drive blankRemoving a drive carrierPrerequisites1. Follow the safety guidelines listed in Safety instructions.2. Remove the front bezel.3. Using the management software, prepare the drive for removal. If the drive is online, the green activity or fault indicatorflashes while the drive is turning off. When the drive indicators are off, the drive is ready for removal. For more information,see the storage controller documentation.CAUTION: Before attempting to remove or install a drive while the system is running, see the documentationfor the storage controller card to ensure that the host adapter is configured correctly to support driveremoval and insertion.CAUTION: To prevent data loss, ensure that your operating system supports drive installation. See thedocumentation supplied with your operating system.Steps1. Press the release button to open the drive carrier release handle.2. Holding the drive carrier release handle, slide the drive carrier out of the drive slot.NOTE: If you are not replacing the drive immediately, install a drive blank in the empty drive slot to maintain propersystem cooling.70 Installing and removing system components