Lights 1073 Align the securing tabs on the front panel with the corresponding slots onthe chassis; connect the FRONT_LED cable to the front panel.4 Rotate the front panel towards the computer until it snaps into place.5 Replace the drive panel (see "Installing the Drive Panel" on page 54).6 Replace the computer cover (see "Replacing the Computer Cover" onpage 119).7 Connect your computer and devices to electrical outlets, and then turnthem on.Removing the Rear LED Board1 Follow the procedures in "Before You Begin" on page 9.2 Remove the computer cover (see "Removing the Computer Cover" onpage 13).1 front panel 2 FRONT_LED cable3 securing tabs (4)123
