60 Drives5 Slide the drive-release latch towards the base of the computer to releasethe shoulder screw, and then slide the media card reader out of thedrive bay.6 Replace the drive panel (see "Installing the Drive Panel" on page 54).7 Replace the computer cover (see "Replacing the Computer Cover" onpage 119).NOTICE: To connect a network cable, first plug the cable into the network port ordevice and then plug it into the computer.8 Connect your computer and devices to electrical outlets, and then turnthem on.Installing a Media Card Reader1 Follow the procedures in "Before You Begin" on page 9.2 Remove the computer cover (see "Removing the Computer Cover" onpage 13).1 drive-release latch 2 media card reader21
