Memory 297 Connect your computer and devices to electrical outlets, and then turnthem on.8 When the message appears stating that memory size has changed, press to continue.9 Log on to your computer.10 Right-click the My Computer icon on your Windows desktop and clickProperties.11 Click the General tab.12 To verify that the memory is installed correctly, check the amount ofmemory (RAM) listed.Removing MemoryCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge and damage to internal components,ground yourself by using a wrist grounding strap or by periodically touching anunpainted metal surface on the computer chassis.1 Follow the procedures in "Before You Begin" on page 9.2 Remove the computer cover (see "Removing the Computer Cover" onpage 13).3 Press out the securing clip at each end of the memory module connector.4 Grasp the module and pull it upwards.If the module is difficult to remove, gently ease the module back and forthto remove it from the connector.
