A S S e r i e s H a r d wa r e Ma n u a l1 2 - 4_1212.1.4 System LogIf ISPSoft is connected to an AS Series, you can view actions and errors in the AS Series by clicking System Log on thePLC menu. The CPU can store up to 20 error log sets. After the 20 sets are stored, the 1st log is replaced with the 21 st ifthere are new logs coming in, and the old logs are replaced with the new ones sequentially. When the memory card isinstalled in the CPU module, 20 sets of the old logs are backed up in the memory card and up to 1000 logs can berecorded. If the stored logs exceed 1000, the oldest 20 logs are replaced with the newest 20 logs in the memory card.(1) On the PLC menu, click System Log.(2) The System Log window appears. Click Clear Log to clear the error log in the window and the error log in the CPUmodule, and reset the CPU module. Group No.: The number 1 indicates that the error occurred in the CPU module or the right-side module 1. Thenumbers 2–16 indicate the error occurred in the remote modules 1–15. Module No.: The number 0 indicates that the error occurred in the CPU module or the remote module. Thenumbers 1–32 indicate the error occurred in the right-side module of the CPU module / remote module.The number 1 represents the closest module to the CPU module or the remote module. This numberincreases from the closest to the furthest from the CPU module or the remote module. Note: up toeight extension modules can be connected to the right-side of the remote module. PLC/Module name: Model names of the CPU, remote, and extension modules.
