Chapter 6 Control TerminalsCP20006-46-1 Remove the Cover for WiringPlease remove the top cover before wiring the multi-function input and output terminals,NOTE The drive appearances shown in the figures are for reference only, a real drive may look different.Frame A & BScrew torque: 12~15Kg-cm / [10.4~13lb-in.] /[1.2~1.5 Nm]Loosen the screw and press the tabs on both sidesto remove the cover.Frame CScrew torque: 12~15Kg-cm / [10.4~13lb-in.] /[1.2~1.5 Nm]Loosen the screws and press the tabs on both sidesto remove the cover.Frame D0 & DScrew torque: 12~15Kg-cm / [10.4~13lb-in.] / [1.2~1.5 Nm]To remove the cover, lift it slightly and pull outward.Loosen the screws and press the tabs on both sides to remove the cover.Frame EScrew torque: 12~15Kg-cm / [10.4~13lb-in.] / [1.2~1.5 Nm]To remove the cover, lift it slightly and pull outward.
