Denon ADV-700 Operating Instructions Manual
Also see for ADV-700: Brochure & specsOperating instructionsOperating instructionsOperating instructionsService manual
46ENGLISH23 TROUBLESHOOTING2 Are all the connections correct ?2 Are you following the instructions in the manual ?2 Are the speakers and other components operating properly ?If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may bedamaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denonsales office.Symptom Cause Measures PageDISPLAY not lit and sound notproduced when power switch set toon.• Power cord not plugged in securely. • Check the insertion of the power cordplug.5DISPLAY lit but sound not produced.• Speaker cords not securely connected.• Improper position of the audio functionbutton.• Volume control set to minimum.• MUTING is on.• Digital signals not input Digital inputselected.• Connect securely.• Set to a suitable position.• Turn volume up to suitable level.• Switch off MUTING.• Input digital signals or select input jacksto which digital signals are being input.819192019Monitor doesn't display an image.• Connections between the video outputjack of this unit and the input connectorof the monitor are incomplete.• The input setting of the monitor TV isdifferent.• The video signals of the various devicesare not uniform.• Check whether the connections arecorrect.• Set the input switching of the TV to thejack to which the video input isconnected.• Make settings uniform for eithercomposite video or S-video connectors.6, 7—6, 7The program cannot be copied fromDVD to the VCR.• Almost all movie software contains acopy prevention signal.• A copy cannot be made. —The subwoofer does not producesound.• Power is not being supplied to thesubwoofer.• The subwoofer setting is made to "No"in the setup.• The output of the subwoofer has notbeen connected.• Switch on the power of the subwoofer.• Change the setting to “Subwoofer” inthe setup.• Make the proper connections.—148The test tone is not output. • The surround mode is set to a modeother than auto decode.• Set to auto decode. 22This unit does not operate properlywhen remote control unit is used.• Batteries dead.• Remote control unit too far from thisunit.• Obstacle between this unit and remotecontrol unit.• Different button is being pressed.• < and > ends of battery inserted inreverse.• The mode selection of the remotecontrol is not properly selected. TheDVD mode, AV mode, or audio mode isnot properly selected.• Replace with new batteries.• Move closer.• Remove obstacle.• Press the proper button.• Insert batteries properly.• Press the remote control modeselection button for the item you wishto operate. To operate this unit, usewith the DVD mode.1010109109Remote control unit Common problems when listening to the discs, tapes and FM broadcasts, etc.Check again before assuming the player is malfunctioningSymptom PageCheckDVD operationPlayback does not start when PLAYbutton is pressed.Playback stops immediately.—45• Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)• Discs other than DVDs, video CDs and music CDs cannot be played.• Disc is dirty. Wipe off the dirt.Menu playback of video CD’s is notpossible.—• Menu playback is not possible with anything but video CDs with playback control.Picture is disturbed during the searchoperation.—• Some disturbance is normal.Buttons do not operate. 18• Some operations are disabled for some discs.No subtitles are displayed. —40, 41• Subtitles are not displayed for DVDs not containing subtitles.• Subtitles are turned off. Turn the subtitles setting on.Audio (or subtitle) language does notswitch.3537• The audio (or subtitle) language does not switch for discs which do not include multipleaudio (or subtitle) languages.• For some discs the audio (or subtitle) language cannot be switched when the operationto switch it is performed, but can be switched on the menu screens.Angle does not switch. 36• The angle cannot be switched for DVDs which do not contain multiple angles. In somecases multiple angles are only recorded for specific scenes.Playback does not start when thetitle is selected.44• Check the “RATINGS SETUP” setting.The password for rating level hasbeen forgotten.Reset all the DVD setting toFactory Preset.44• While the player is in the stop mode, hold the player's SKIP (8) button and thePAUSE (3) button down simultaneously for longer than 3 seconds (until “INITIALIZE”disappears from the TV monitor).The lock will be released and the DVD all default settings and picture settings will returnto the default values.The disc is not played with the audioor subtitle language set as thedefault setting.35• The disc does not play with the selected audio or subtitle language if that audio orsubtitle language is not included on that DVD.Picture is not displayed in 4:3 (or16:9).42• Set the “TV ASPECT” default setting to the proper setting for the connected TV.Menu screen messages for thedesired language do not display.40, 41• Check the default setting for the disc language’s menu language. |
Related manuals for Denon ADV-700
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine