763 q Select the item to be set. w Select the parameter.Function/Mode Status :Set whether or not to turn on the on screen display of the input source name and input mode when an input source is selected.Master Volume Status :Set whether or not to turn on the on screen display of the main volume level when the main volume is operated.Display Mode :Mode 1 : Flickering is not prevented.Mode 2 : Prevents flickering of the on screen display when there is no video signal.Use this mode if the on screen display does not appear in the Mode 1, as may happen according to the TV being used.(Main unit) (Remote control unit) (Main unit) (Remote control unit)4-6. Setting the On Screen Display (OSD)• Use this to turn the on screen display (messages other than the menu screens) on or off.• Sets the on screen display’s display mode.1 Select “On Screen Display” at the Video Setupmenu.2 Display the On Screen Display screen.F u n c / M o d e : O N* O n S c r e e nO n S c r e e n* V i d e o S e t u p(Main unit) (Remote control unit)(Main unit) (Remote control unit)4 Enter the setting.The Video Setup menu reappears.(Main unit) (Remote control unit)5 Select “Exit” and press the ENTER button at theVideo Setup menu screen.The System Setup Menu reappears.E x i t* V i d e o S e t u p(Main unit)(Remote control unit)(Main unit)(Remote control unit)
