946-7. ZONE3 and ZONE4 tone control and channel level setting1 Select “Zone3/4 Tone/Ch Lev.” at the Zone Setupmenu.• Adjust the sound output from ZONE3 and ZONE4.Z o n e 3 / 4* Z o n e S e t u p2 Display the Zone3/4 Tone/Ch Lev. screen.(Main unit) (Remote control unit)(Main unit) (Remote control unit)3 Select the Zone whose sound you want to adjust.(ZONE3, ZONE4)Switch to the setting screen.(Main unit)(Remote control unit)(Main unit)(Remote control unit)B a s s : 0 d B* Z 3 T o n e / C h L e v4 q Select the item to be set. w Adjust the parameter.Bass : Adjust the tone for the bass.Treble : Adjust the tone for the treble.(The bass or treble sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)HPF : Set this to “ON” if your speakers do not have a very strong capacity for producing low bass. Using the high pass filtermakes it possible to reduce distortion of the bass sound.Channel Level : Set so that the playback level is the same for the left and right channels.(The volume can adjusted between –12 dB and +12 dB in steps of 1.0 dB.)(Main unit) (Remote control unit) (Main unit) (Remote control unit)Example: When “Zone3” is selected5 Press the ENTER button to return to the Zone3/4 Tone/Ch Lev. screen.Use the same procedure to make the settings for ZONE4.(Main unit) (Remote control unit)Z 3 T o n e / C h L e v .* Z o n e 3 / 4
