Denon AVR-1404/484 Operating Instructions Manual

Contents

30ENGLISH20 SPECIFICATIONS2 Audio section• Power amplifierRated output: Front: 75 W + 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)130 W + 130 W (6 Ω/ohms, EIAJ)Center: 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)130 W (6 Ω/ohms, EIAJ)Surround: 75 W + 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)130 W + 130 W (6 Ω/ohms, EIAJ)Output terminals: Front: A or B 16 ~ 16 Ω/ohmsA + B 12 ~ 16 Ω/ohmsCenter, Surround: 16 ~ 16 Ω/ohms• AnalogInput sensitivity / input impedance: 200 mV / 47 kΩ/kohmsFrequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON)2 Video section• Standard video jacksInput / output level and impedance: 1 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB• S-video jacksInput / output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohmsC signal — 0.286 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB2 Tuner section[FM] (note: μV at 75 Ω/ohms, 0 dBf=1 x 10 –15 W) [AM]Receiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHzUsable Sensitivity: 1.0 μV (11.2 dBf) 18 μV50 dB Quieting Sensitivity: MONO 1.6 μV (15.3 dBf)STEREO 23 μV (38.5 dBf)S/N ratio: MONO 80 dB (IHF-A weighted)STEREO 75 dB (IHF-A weighted)Total Harmonic Distortion: MONO 0.15 % (1 kHz)STEREO 0.3 % (1 kHz)2 GeneralPower supply: AC 230 V, 50 Hz (for ASIA model)AC 220 V, 50 Hz (for CHINA model)AC 120 V, 60 Hz (for TAIWAN R.O.C. model)Power consumption: 220 W1 W Max (Standby)Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mmMass: 10.3 kg2 Remote control unit (RC-942)Batteries: R6P/AA Type (two batteries)External dimensions: 55 (W) x 225 (H) x 34.5 (D) mmMass: 165 g (including batteries)* For purposes of improvement, specifications and design are subject to change without notice.* (EIAJ) : Standards established by the Japan Electronics and Information Technology Industries Association (JEITA).