Denon AVR-1706 Operating Instructions Manual

Also see for AVR-1706: Service manual Operating instructions Brochure & specs Operating instructions

Contents

PageDefault settingsSystem Setup44Advanced Setup Advanced SetupENGLISHSystem setup items and default values (set upon shipment from the factory)2 SpeakerConfigurationInput the combination of speakers in your system and theircorresponding sizes (SMALL for regular speakers, LARGEfor full-size, full-range) to automatically set the compositionof the signals output from the speakers and the frequencyresponse.Front Sp.LargeCenter Sp. Surround Sp.SubwooferSmall SmallYesSurround BackSp.Small / 2spSubwooferModeThis selects the subwoofer speaker for playing deep basssignals.4 Subwoofer mode = Normal38, 393 Delay TimeThis parameter is for optimizing the timing with which theaudio signals are produced from the speakers andsubwoofer according to the listening position.40FrontL & R Center SurroundL & RSubwoofer12 ft 12 ft 10 ft12 ftSurround BackL & R10 ft39, 401 Auto Setup Set this to switch the surround back channel’s poweramplifier for ZONE2 use. Surround Back 8~1042Digital InAssignmentThis assigns the digital input terminals for thedifferent input sources.InputsourceDigitalInputsCD AUX DVD / VDP TV / DBSCOAXIAL1 COAXIAL2 OPTICAL1 OPTICAL278 Video InputModeSets the input signal to be output from the monitor outputterminal. AUTO 42CrossoverFrequencySets the frequency (Hz) below which the bass sound ofthe various speakers is to be output from the subwoofer.5 80 Hz 406 Test ToneThis adjusts the volume of the signals output from thespeakers and subwoofer for the different channels in orderto obtain optimum effects.FrontL & R Center SurroundL & RSubwoofer0 dB 0 dB 0 dB0 dBSurround BackL & R0 dB419 Audio Delay Sets the audio delay to delay the sound and synchronize itwith the picture. 0 ms 43Power AmpAssignmentSets this to switch the surround back channel’s poweramplifier for ZONE2 use. Surround Back 431210AutoSurroundModeAuto surround mode function setting. Auto Surround Mode = ON 43Ext. In SWLevel Sets the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB 4311ENGLISH