Easy Setup Procedure Easy Setup Procedure9ENGLISHENGLISH• For best picture quality (especially with progressive DVD and other high definition sources), choose thecomponent video connection to your monitor. S-Video and composite video outputs are also provided ifyour monitor does not have component video inputs.Connecting a DVD player and monitor• To connect the video output from the DVD player to the AVR-1907, you only need to choose oneconnection type. For more information about the video up conversion function ( page 14).• To connect the digital audio output from the DVD player, you can choose from either the coaxial oroptical connections. If you choose to use the coaxial connection, it needs to be assigned. For moreinformation about Digital Input Assignment ( page 47).Audio signal flow is shown with white arrows, video signal flow is shown with gray arrows.• The AVR-1907 is equipped with another set of input terminals for a non-DVD video disc player (such aslaser disc, VCD/SVCD, or future high definition disc player). The above connection guidelines for DVDalso apply to the VDP input.• The component video input and/or output terminals may be labelled differently on some monitors orvideo components. Check the owner’s manuals for other components for further information.DVD playerS VIDEOOUTRLAUDIO OUTVIDEOOUTCOMPONENT VIDEO OUTYPBPROPTICALOUTFHGDRLRLAS VIDEOINVIDEOINMonitorCOMPONENT VIDEO INYP BPRFHG