Denon AVR-1908 Owner's Manual

Also see for AVR-1908: Specifications Comparison chart Specifications Owner's manual Service manual

Denon AVR-1908 Owner's Manual Manual pdf 35 page image

ENGLISHInput ModeSet the input mode for this source.The selectable input modes depend on the input source and“Assign” setting (vpage 32, 33).[Input source] TUNER[Selectable items]Analog : Play only signals from analog input.EXT. IN : Play only signals from EXT. IN input.[Input source] XM[Selectable items]AUTO : Automatically detect input signal and perform playback.EXT. IN : Play only signals from EXT. IN input.[Input source] CD AUX CDR DVD/HDP TV/CBL VCRV.AUX[Selectable items]AUTO : Detect type of digital input signal and decode and playautomatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.Analog : Play only signals from analog input.EXT. IN : Play only signals from EXT. IN input.RenameChange the display name for this source.Names containing up to 5 characters can be input.[Characters that can be input]A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - . / : ; = ” ? @ [ \ ] (space)Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting• With HDMI, the video and audio signals are transferredsimultaneously. When HDMI is assigned to an input source, theaudio signal switches to HDMI along with the video signal. To usewith the digital audio input connectors assigned, set menu “InputMode” to “AUTO”.• When the AVR-1908 and monitor are connected with an HDMI cable,if the monitor is not compatible with HDMI audio signal playback,only the video signals are output to the monitor.• The audio signals input from the analog, digital and EXT. IN connectorsare not output to the monitor.AssignAssign input sources to input connectors.HDMISelect HDMI connector to assign to this source.[Input source] DVD/HDP TV/CBL VCR V.AUX[Selectable items]HDMI1 : Assign HDMI1 input connector.HDMI2 : Assign HDMI2 input connector.None : No HDMI input connector assigned.Input source DVD/HDP TV/CBL VCR V.AUXDefaultsetting HDMI1 HDMI2 None NoneOperating from the main unit or main remotecontrol unitGOperation on the main unitHn Selecting the “AUTO”, “PCM” or “DTS” modePress the INPUT MODE button.AUTO PCM DTSn Selecting the analog modePress the ANALOG button.n Selecting the EXT.IN modePress the EXT.IN button.GOperation on the main remote control unitHPress the INPUT button.AUTO PCM DTSAnalogEXT. IN• Only set “PCM” and “DTS” when playing the respective signals.• When a digital signal is properly input, the “ ” indicator lightson the display. If the “ ” indicator does not light, check thedigital input connector assignment and the connections.• The surround mode cannot be set if the input mode is set to “EXT.IN”.