Denon AVR-1908 Owner's Manual

Also see for AVR-1908: Specifications Comparison chart Specifications Owner's manual Service manual

Denon AVR-1908 Owner's Manual Manual pdf 45 page image

ENGLISHPresetting Radio Stations(Preset Memory)Your favorite broadcast stations can be preset so that you can tunethem in easily. Up to 56 stations can be preset.1 Tune in the broadcast station you want to preset.2 Press [MEMORY].3 Press SHIFT to select the block (A to G) in which thestation is to be preset.4 Press PRESET CHANNEL to select the preset number(1 to 8).5 Press [MEMORY] again to complete the setting.• To preset other stations, repeat steps 1 to 5.• Stations can be preset automatically at menu “Input Setup” – “AutoPreset” (vpage 31).NOTEPreset stations are erased by overwriting them.1 Either turn or press [TUNER] toselect “TUNER”.2 Set [MODE SELECTOR 1] to “AUDIO”.(vpage 48 “Remote Control Unit Operations”)3 Press BAND to select “FM” or “AM”.4 Tune in the desired broadcast station.q To tune in automatically (Auto Tuning)Press [MODE] to light the “AUTO” indicator on the display, then useTUNING to select the station you want to hear.w To tune in manually (Manual Tuning)Press [MODE] to turn off the display’s “AUTO” indicator, then useTUNING to select the station you want to hear.Listening to FM/AM Broadcasts• It is also possible to switch to “FM” or “AM” in step 1 by pressing[TUNER].• If the desired station cannot be tuned in with auto tuning, tune it inmanually.• When tuning in stations manually, press and hold TUNING to changefrequencies continuously.• The time for which the on-screen display are displayed can be set at“Manual Setup” – “Option Setup” – “On-Screen Display” (vpage29).Basic Operation1 Press SHIFT to select the memory block (A to G).2 Press PRESET CHANNEL to select the desired presetchannel (1 to 8).n Default settingsAuto tuner presetsA1 ~ A8 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /90.1 MHzB1 ~ B8 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,90.1 / 90.1 MHzC1 ~ C8 90.1 MHzD1 ~ D8 90.1 MHzE1 ~ E8 90.1 MHzF1 ~ F8 90.1 MHzG1 ~ G8 90.1 MHzPlaying Video and Audio Equipment1 Prepare the equipment.q Load the DVD, CD or other software in the player.(vSee the operating instructions of the respective devices.)w To play a video device, switch the monitor input.(vSee the monitor’s operating instructions.)2 Use SOURCE SELECT to select the input source.3 Set [MODE SELECTOR 1] to “AUDIO” or “VIDEO”.(vpage 48 “Remote Control Unit Operations”)4 Set [MODE SELECTOR 2] to the component you wantto operate.5 Start playback.(vSee the operating instructions of the respective devices.)Basic OperationGetting Started Connections Setup Playback Remote Control Multi-Zone Information TroubleshootingListening to Preset Stations