Denon AVR-1908 Owner's Manual

Also see for AVR-1908: Specifications Comparison chart Specifications Owner's manual Service manual

Denon AVR-1908 Owner's Manual Manual pdf 49 page image

ENGLISHGetting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting• To cancel, press , then turn until “ZONE2 SOURCE” is displayed.• Make a test recording before starting the actual recording.• Sources selected with the REC OUT mode are output from ZONE2as well.• In the REC OUT mode, the remote control unit’s ZONE2 modebuttons cannot be operated.• The “XM” digital audio output signals are not output from theOPTICAL2 output connectors.• The source selected for MAIN ZONE is output from the digital outputconnector (OPTICAL 2).The source selected in the REC SELECT mode is not associated withthe output from the digital output connector (OPTICAL 2).NOTE• Digital signals are not output from the analog REC OUT connector.• Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.• Input sources for which “Delete” is selected at “Source Delete”cannot be selected.Recording on an External Device(REC OUT mode)You can listen to one program source while recording a differentprogram source.1 Press .“ZONE2 SOURCE” is shown on the display.ZONE2 SOURCE ZONE2 TUNER ZONE2 XM····RECOUT XM RECOUT TUNER RECOUT SOURCE······2 Turn until “RECOUT SOURCE”is displayed.The “ ” indicator lights.3 Turn to choose the input sourceto be recorded.4 Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage42).5 Start recording.For operating instructions, refer to the respective equipment’soperating instructions.Other Operations andFunctionsOther OperationsConvenient Functions1 Press or [CH SELECT].Channel VolumeFL 0.0dB SR 0.0dBC 0.0dB SBR 0.0dBFR 0.0dB SBL 0.0dBSW 0.0dB SL 0.0dBFaderFRONT : REAR2 Use ui, or [CH SELECT] to select thespeaker.The speaker that can be set switches each time one of thebuttons is pressed.3 Use o p to adjust the volume.b “OFF” can be set by pressing o when the subwoofer’s volume isset to –12 dB.Channel LevelYou can adjust the channel level either according to the playbacksources or to suit your taste, as described below.1 Press or [CH SELECT].2 Press ui, or [CH SELECT] to select“Fader”.3 Use o p to adjust the volume of the speakers.(o: front, p: rear)• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker adjustedto the lowest value is –12 dB.Fader FunctionThis function lets you adjust (fade) the sound from all the front orrear speakers at once.