ENGLISH• When viewing HOMI or component video signals via the AVR-1909, the on-screen display appears whenthe MENU button on the main unit or the A.MENU button on the main remote control unit is operated.• When only HOMI or component video signals are input to the AVR-1909, the characters of the on-screendisplay are not displayed over the picture.~Video connectorHOM I connectorY PWC. PNCR~~~Component video Monitorconnectors .0@)S-Video connector'=High picture 1= 1+ l§l l>quality playback '=----.===-' I HOMI connector ~Y pwc. PNCR / / /'=-[=------.:o-'J+ ~ ~ ~ ::" / / AI Component video \')",,71/connectors /",0 """J+10 ?/~).()S-Video connecto~ ;"",,\'--I,=-===:J+ ~ V .Video connector[Flow of video signals inside the AVR-1909]• This function automatically converts various formats of video signals input to the AVR-1909 into theformat used to output the video signals from the AVR-1909 to a monitor.• The AVR-1909's video input/output circuitry is compatible with the following four types of video signals:Digital video signals: HOMIAnalog video signals: Component video, S-Video and VideoVideo inputterminalsMonitor outputterminals- - - - : When 480i/576i signals are input.::!"-... '• When not using this function, connect a monitor output with the same type of connector as the videoinput connector.·The resolution of the HOMI input-compatible monitor connected to the AVR-1909 can be checked atmenu "Information" - "HOMllnformation" (G"'page 53).'~(.}j.• HOMI signals cannot be converted into analog signals.• 1080p component input video signals cannot be output to anything other than component videoconnectors .• 480p/576p, 1080i and nop component video input signals cannot be converted into S-Video or Videoformat.• When a non-standard video signal from a game machine or some other source is input, the videoconversion function might not operate.9