Denon AVR-1909 Owner's Manual

Also see for AVR-1909: Product Compatibility Chart Capabilites and Compatibilities Service manual Owner's manual Brochure & specs

Contents

Denon AVR-1909 Owner's Manual Manual pdf 54 page image

ENGLISHThe default setting for "iPod" is "Mode3". All others are set to "OFF"When set to something other than "OFF", "!lIIimlml" is displayed.RESTORERMode3 (RESTORER HO)Optimized mode for compressed sources with normal highs.Audio DelayCompensate for mismatched timing between video and audio.Delay audio.This sets the delay time for audio signals.[Variable range] I 0 ms I - 200 msIf you wish to adjust the "Audio Delay" while playing HDMI orcomponent video signals, press c:,. to set "OSD" to "OFF". This waythe audio delay can be adjusted while watching the picture. (Press 1::.again to switch to the on-screen display.)~ Operating from the main remote control unitPress [AUDIO DELAY].• This cannot be adjusted when playing in the EXT. IN, DIRECT orSTEREO mode (with "Front Speaker" set to "Large", "ToneControl" to "OFF" and "MultEO", "RESTORER" and "Night Mode"to "OFF".)• When the auto lip sync correction function is operating, you can setwithin the range 0- 100 ms.• Store" Audio Delay" for each input source.-N·U8• When operating by remote control, the onscreen display is notshown.[Selectable items]~: Turn night mode off.Low Low setting.C_O_FF__- __ H~:; _---M-id-~Night ModeOptimized setting for late-night listening.Set the dynamic range compression of the output audio.Mid Middle setting.High High setting.~ Operating from the main remote control unitPress [NIGHHThe "1mmiI" indicator lights when "Low", "Mid" or "High" isselected.-N,u8• When the" Dynamic EO" setting is "ON ': setting is not possible.• When the "Dynamic Volume" setting is "ON': setting is notpossible.• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)signal is input. the "Night Mode" can not be selected.----- Mode 1 ----- Mode2(RESTORER 64) (RESTORER 961Mode 3(RESTORER HO)C OFFThis function restores compressed audio signals to how theywere before compression and corrects the sense of volume ofthe bass and treble to obtain richer playback sound.Mode2 (RESTORER 96):Apply suitable bass and treble boost for all compressed sources[Selectable items]OFFDo not use RESTORER.Mode1 (RESTORER 64):Optimized mode for compressed sources with very weak highs.~ Operating from the main unit or main remotecontrol unitPress RESTORER.About the RESTORER function• Such compressed audio formats as MP3, WMA (Windows MediaAudio) and MPEG-4 MC reduce the amount of data by eliminatingsignal components that are hard for the human ear to hear. TheRESTORER function generates the signals eliminated uponcompression, restoring the sound to conditions near those of theoriginal sound before compression. It also corrects the sense ofvolume of the bass to obtain richer sound with compressed audiosignals .• This is displayed on the menu and can be set when the input sourceIS selected to "XM ': or analog signals (including AM/FM and SIRIUSsignals) or PCM signals (fs = 44.1/48 kHz) are input.51 I For details on adjusting individual parameters, see "Adjusting the parameters" (ll2!r'page 46).