Denon AVR-1909 Owner's Manual

Also see for AVR-1909: Product Compatibility Chart Capabilites and Compatibilities Service manual Owner's manual Brochure & specs

Contents

Denon AVR-1909 Owner's Manual Manual pdf 28 page image

ENGLISHAuto SetupTo make manual adjustments to the settings, see pages 29 - 31.Sound ---=:::!~----~---.--..Jreceptor* Do not hold the microphone in your hand during measurements.Be sure that the path from microphone to the speakers is notblocked by objects. Avoid placing the microphone close to a seatback or wall as sound reflections may give inaccurate results.Preparations1Connect the included calibrated setup microphone tothe SETUP MIC jack on the main unit.The auto setup screen appears automatically.2 Place the microphone at ear height on a tripod or standwith the microphone pointing directly up towards theceiling.1'"-,£;~When using a subwoofer, make the following settings before startingthe auto setup procedure:• Defeat the volume and crossover controls if possible• If this is not possible then set• Volume: "12 o'clock" position• Crossover frequency: "Maximum/Highest Frequency"· Low pass filter: "Off"· Standby mode: "Off"...... . ,: ./.... -'.\ ~ rr;rr = )Example (1)Example CDl-:Measuring positions)The main listening position refers to the most central position whereone would normally sit within the listening environment.MultEO uses the measurements from this position to calculatespeaker distance, level. polarity, and the optimum crossover valuefor the subwoofer.About the main listening position (*M)• Audyssey MultEO® automatically measures the acoustical problemsin the listening environment to create the best audio experience foryour home theater.• Audyssey MultEO optimizes a large listening area where one ormore listeners are seated.Measurements are performed by placing the calibrated microphoneIDM-A409) successively at multiple positions throughout thelistening area as shown in Example CD. For best results, it is stronglyrecommended to measure 6 positions so that the measurementshave the proper spatial weighting.Even if the listening environment is small as shown in Example (1),measuring at multiple points throughout the listening environmentresults in more effective correction.~.J·-: __ 'I ENTERD. '1 l> I ,:-. ,.. ,:_,L·jTRETURN:0GJ;'I;:~: MASTER VOLUME~ 'iJ :' .. ~ ... 'MASTER VOLUME D. '1to"'"-r-------r--Fei=[::RETURN ENTER.& Symbols used to indicate buttons in this manualButton located on both the main unit and the remote controlunit • BUTTONButton only on the main unit •