Denon AVR-1910 Owner's Manual

Also see for AVR1910 - Multi-Zone Home Theater Receiver: Specifications Specification Capabilites and Compatibilities Service manual Getting started

Getting Started Playback Remote Control Information Troubleshooting SpecificationsENGLISH Multi-ZoneSettingsHDMI connectorComponent videoconnectorsS-Video connectorVideo connectorMonitor (TV)Converting Input video signals for Output(Video Conversion Function)The AVR-1910 is equipped with four types of video input terminals (HDMI, Component video, S-Video andvideo) and three types of video output terminals (HDMI, Component video and video).Use the terminals according to the devices to be connected.This function automatically converts various formats of video signals input to the AVR-1910 into the formatused to output the video signals from the AVR-1910 to a monitor.• The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60formats.• The resolution of the video signal input to the AVR-1910’s HDMI terminal is the resolution set at“Resolution” (vpage 34). (1080p HDMI signals and 1080p component signals are output at 1080p,regardless of the setting.)• Resolutions of HDMI-compatible TVs can be checked at “HDMI Information” (vpage 48).NOTE• The S-Video input terminal is exclusively for use with a Control Dock for iPod. It can be used when theControl Dock for iPod is connected to the terminal assigned to the iPod input source.• HDMI signals cannot be converted into analog signals.• When a non-standard video signal from a game machine or some other source is input, the videoconversion function might not operate.Important InformationHDMI connectorComponent videoconnectorsS-VideoconnectorVideo connectorHDMIconnectorComponent videoconnectorsVideo connectorHDMI connectorComponent videoconnectorsVideo connectorVideo devicesAVR-1910Output Input(IN)Output(MONITOR OUT) InputThe way the on-screen display of the menus, status, etc., is displayed differs according to the type of videosignal input to the AVR-1910.How the on-screen display is displayed depending on thevideo input signalWhen video signals are input from the HDMI or component video terminalsMenu: Switches to a screen with a black background and the menu is superimposed. (b1)Status display: Not displayed.b1: If you want to display the menus superimposed on the picture being played, input the same videosignals to the video terminals. When a menu is displayed, the picture switches to the one being inputfrom the video terminals and the menu is displayed superimposed over this picture.••When video signals are being input from the S-Video or video terminalsMenu: Menus are displayed superimposed over the picture being played.Status display: Displayed.••Examples of on-screen displayMenu screen• Status display screen•When the input source isswitchedWhen the volume is adjustedMENU1.Parameter2.Information3.Auto Setup4.Manual Setup5.Input Setup[ENT]:Select MODE:STEREOIN :DVD[Auto]Master Volume -80.0dBStatus display: The operating status is displayed temporarily on thescreen when the input source is switched or thevolume is adjusted.nNOTEMenus and status display screens are not displayed for component video terminal pictures. Todisplay them, also connect the video terminals.Connections