Denon AVR-1910 Owner's Manual

Also see for AVR1910 - Multi-Zone Home Theater Receiver: Specifications Specification Capabilites and Compatibilities Service manual Getting started

28Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISHMulti-ZoneSetting items Setting contentsAuto Lip SyncAutomatic compensationfor timing shift in audio andvideo output.ON : Compensated.OFF : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.Amp : Use speakers connected to AVR-1910 for audio playback.TV : Use speakers of TV for audio playback.NOTEWhen the HDMI control function is operating, the setting of audio playbackin the connected TV takes priority (vpage 49 “Controlling HDMI-compatible devices from the AVR-1910 (HDMI Control Function)”).HDMI ControlExternal devices can becontrolled from the AVR-1910 and the AVR-1910 canbe controlled from externaldevices.NOTEThe HDMI controlfunction controlsoperations of a TV thatis compatible with theHDMI control function.Make sure that the TVand HDMI are connectedwhen you perform HDMIcontrol.ON : Use the HDMI control function.OFF : Do not use the HDMI control function.• Please consult the operating instructions for each connected deviceto check the settings.• For details on the HDMI control function, see “Controlling HDMI-compatible devices from the AVR-1910 (HDMI Control Function)”(vpage 49).NOTE• When “HDMI Control” is set to “ON”, it consumes more standbypower.• When not using this unit for a long period, we recommend that you pressto turn off (jOFF) the power.• When the “HDMI Control” setting has been changed, always turn off thepower to the connecting devices afterwards and then turn back on.• The “HDMI Control” does not work when the power to the equipment isoff.• When “HDMI Control” is set to “ON”, power is supplied constantly to theAC outlet (UNSWITCHED).Standby SourceSet the HDMI connector forHDMI signal input duringstandby.This can be set when“HDMI Control” is setto “ON”.Last : Standby with last used input source during power on.HDMI1 / HDMI2 / HDMI3 / HDMI4 : The standby mode is set at the inputsource assigned to the respective.Make settings for HDMI video/audio output.Making the HDMI settings (HDMI Setup)Default settings are underlined.Setting items Setting contentsPower Off ControlThe power of the AVR-1910and external device turn offtogether.This can be set when“HDMI Control” is setto “ON”.ON：Switched.OFF：Not switched.• Please consult the operating instructions for each connected deviceto check the settings.• For details on the HDMI control function, see “Controlling HDMI-compatible devices from the AVR-1910 (HDMI Control Function)”(vpage 49).Making detailed settings (Manual Setup): Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSettings