Denon AVR-1910 Owner's Manual

Also see for AVR1910 - Multi-Zone Home Theater Receiver: Specifications Specification Capabilites and Compatibilities Service manual Getting started

Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISH Multi-ZoneMaking the input settings (Input Setup)Setting items Setting contentsDecode ModeSet the input source’sdecoding mode.Auto : Detect type of digital input signal and decode and playautomatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.• This can be set for input sources for which “HDMI” or “Digital” isassigned at “Assign” (vpage 33).• Normally set this to “Auto”.Setting items Setting contentsRenameChange the input source’sdisplay name to the desiredname.1. Use o p to set the cursor to the character you want to change.2. Use ui to change the character, then press .Up to 8 characters can be input.The input character type can be switched by pressing while thedisplay name is being changed.• The types of characters that can be input are as shown below.GCapital lettersH ABCDEFGHIJKLMNOPQRSTUVWXYZGSmall lettersH abcdefghijklmnopqrstuvwxyzGSymbolsH ’ ( ) b + – . / : ; < = > ? [ ]GNumbersH 0123456789 (space)••DefaultThe changed display namesare reset to the defaults.Yes : Reset to the defaults.No : Do not reset to the defaults.Changing the Input Source’s Display Name (Rename)Default settings are underlined.Setting items Setting contentsRepeatMake settings for repeatmode.All : Repeat all songs.One : Repeat the current song.OFF : Cancel repeat mode.ShuffleMake settings for shufflemode.n When DENON control dock for iPod ASD-1R or ASD-11R isconnectedSongs : Shuffle all songs.Albums : Shuffle songs from current album only.OFF : Cancel shuffle mode.This can be selected for input sources for which “Assign” is assigned at the “iPod Dock” (vpage33) setting.Setting the iPod Playback Mode (iPod Playback Mode)Default settings are underlined.Use this procedure to change the display name of the currently selected input source.: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSetting items Setting contentsSource Level (Analog)Correct the playback level ofthe analog audio input.–12dB ~ +12dB (0dB)Source Level (Digital)Correct the playback level ofthe digital audio input.–12dB ~ +12dB (0dB)Use this procedure to correct the playback level of the currently selected input source's audio input.Set this if there are differences in the input volume levels between the different sources. The analoginput level and digital input level can be corrected separately.Correcting the Input Source’s Playback Level(Source Level) Default settings are underlined.Settings