Getting Started Setup Playback Remote Control Multi-zone Information Troubleshooting SpecificationsRLRLRLRLRLRL46#800'&3$&/5&3 463306/%#"$,3-463306/%3-'30/53-"6%*0Antenna TerminalsAn F-type FM antenna cable plug can be connected directly.Direction of broadcasting stationAM loop antenna(supplied)FMantenna75 Ω/ohmsCoaxial cableFM indoorantenna(supplied)GroundAM outdoorantennaExternal Power AmplifierWhen using just one surround back speaker, connect it to the leftchannel (SBL).Power amplifier n AM loop antenna assemblyRemove the vinyl tie and take outthe connection line.Bend in the reverse direction.a. With the antenna on top of anystable surface.Mount b. With the antenna attached to awall.Installation hole Mounton wall, etc.Connection of AM antennas1. Push the lever. 2. Insert the conductor. 3. Return the lever.NOTE• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect the AMloop antenna.• Make sure the AM loop antenna lead terminals do not touch metalparts of the panel.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building,as close to the point of cable entry as practical.Connections