Denon AVR-2809CI Owner's Manual

Also see for AVR-2809CI: Product Compatibility Chart Capabilites and Compatibilities Service manual Service manual Specification

Denon AVR-2809CI Owner's Manual Manual pdf 60 page image

Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting SpecificationsRecording on an External Equipment(REC OUT mode)You can listen to one program source while recording a differentprogram source.1 Press / REC SELECT> until “ZONE2Source”.b The ZONE2 or ZONE3 selection mode changes each time youpress the button, and “ZONE2 Source” or “ZONE3 Source” isdisplayed.2 Turn until “RECOUT Source” isdisplayed.The “ ” indicator lights.n During ZONE2 Rec SelectZONE2 Source ZONE2 TUNER ZONE2 SIRIUS····RECOUT SIRIUS RECOUT TUNER RECOUT Source······3 Turn to choose the input sourceto be recorded.4 Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage51).5 Start recording.For operating instructions, refer to the respective equipment’soperating instructions.Other OperationsOther Operations and FunctionsPlaying Super Audio CD1 Assign the HDMI input connector at the “HDMI In”setting (vpage 38).2 Either turn or press [SOURCESELECT] to select the input source assigned in step 1.The “ ” indicator lights on the display.3 Press INPUT MODE to select “AUTO” (vpage 37).Select the input mode according to the program source to beplayed.4 Select the surround mode (vpage 40 ~ 42).We recommend playing in the DIRECT mode.5 Start playing the Super Audio CD.The “ ” indicator lights on the display.For operating instructions, refer to the respective equipment’soperating instructions.• When playing DSD signals in the DIRECT or PURE DIRECT mode,the DSD signals are converted as such into analog signals. Whenplaying in other surround modes, the DSD signals are fi rst convertedinto PCM format, then into analog signals.• “DSD DIRECT” is shown on the display when playing DSD 2-channelsignals in the DIRECT mode. “DSD MULTI DIRECT” is shown onthe display when playing DSD multi-channel signals in the DIRECTmode.INPUT MODESOURCE SELECTSOURCE SELECTINPUT MODE[ AMP]Button located on both the main unitand the remote control unit BUTTONButton only on the main unit