Denon AVR-2809CI Owner's Manual

Also see for AVR-2809CI: Product Compatibility Chart Capabilites and Compatibilities Service manual Service manual Specification

Denon AVR-2809CI Owner's Manual Manual pdf 35 page image

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting SpecificationsFor details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).Volume LimitMake a setting for maximum volume.[Selectable items]OFF : Do not set a maximum volume.–20dB : Set the maximum volume to –20 dB.–10dB : Set the maximum volume to –10 dB.0dB : Set the maximum volume to 0 dB.Power On LevelDefine the volume setting that is active when the power is turnedon.[Selectable items]Last : Use the memorized setting from the last session.– – – : Always use the muting on condition when poweris turned on.–70dB ~ +18dB : Set the volume level when the power is turned onin units of 1 dB.Mute LevelSet the amount of attenuation when muting is on.[Selectable items]Full : The sound is cut off entirely.–40dB : The sound is attenuated by 40 dB.–20dB : The sound is attenuated by 20 dB.F Menu screen F2.Manual Setup2.HDMI Setup1.Speaker Setup4.Zone Setup5.Option Setup3.Audio SetupOption SetupMake various other settings.a Amp AssignDefine how the amplifier for the surround back speaker channelsis used.The places where the surround back amplifier are used can be setfreely according to the usage environment. This makes it possible tooutput sound to rooms other than the room (the MAIN ZONE) wheresurround playback is performed (multi-zone playback) or play the soundwith high quality using the front speakers (bi-amp connections).[Selectable items]7.1ch : The surround back channel is output from thespeakers connected to the SURR.BACK/AMPASSIGN terminals.ZONE2 : When ZONE2 power is on, ZONE2 sound isemitted from the speaker connected to theSURR.BACK/AMP ASSIGN terminal.ZONE3 : When ZONE3 power is on, ZONE3 sound isemitted from the speaker connected to theSURR.BACK/AMP ASSIGN terminal.ZONE2/3-MONO : ZONE2 monaural sound is emitted from thespeaker connected to the SURR.BACK/AMPASSIGN (L) speaker, and ZONE3 monaural soundis emitted from the speaker connected to theSURR.BACK/AMP ASSIGN (R) terminal.FrontA Bi-Amp : The Front A channel for Bi-Amp use is outputfrom the speakers connected to the SURR.BACK/AMP ASSIGN terminals.FrontB Bi-Amp : The Front B channel for Bi-Amp use is outputfrom the speakers connected to the SURR.BACK/AMP ASSIGN terminals.2.Vol.Control3.Source Delete4.On-Screen Display5.Quick Select Name6.Trigger Out7.Remote ID Setup8.232C Port9.Display10.Setup Lock1.Amp Assign2-5.Option SetupThis can be set when “Volume Level” is set to “VAR“.This can be set when “Volume Level” is set to “VAR“.“VAR” is fixed when a power amplifier is assigned to the ZONE2 orZONE3 output channel at menu “Manual Setup” – “Option Setup”– “Amp Assign” (vpage 32).The “Level Lch” and “Level Rch” can be set when “Channel“ is setto “Stereo“.HPFWhen using speakers that cannot satisfactorily play low frequencies,distortion of the bass sound can be reduced by setting “HPF” to“ON”.[Selectable items]OFF : The low range is not attenuated.ON : The low range is attenuated.Level LchAdjust the left channel output level.[Variable range] –12dB ~ 0dB ~ +12dBLevel RchAdjust the right channel output level.[Variable range] –12dB ~ 0dB ~ +12dBChannelSwitch between stereo and mono output.[Selectable items]Stereo : Select stereo output.Mono : Select monaural output.When menu “Manual Setup” – “Option Setup” – “Amp Assign”(vpage 32) is set to ZONE2/3-MONO”, the “Channel” setting isautomatically set to “Mono”.Volume LevelAdjust the main volume level.[Selectable items]VAR : Allow volume adjustment by remote control.–40dB : Fix the volume to –40 dB.0dB : Fix the volume to 0 dB.Setup