Denon AVR-2809CI Owner's Manual

Also see for AVR-2809CI: Product Compatibility Chart Capabilites and Compatibilities Service manual Service manual Specification

Denon AVR-2809CI Owner's Manual Manual pdf 64 page image

Getting Started Connections Setup Playback Multi-zone Information Troubleshooting SpecificationsRemote Control Unit OperationsMain Remote Control Unit(RC-1102)• On the main remote control unit, the display switches accordingto the device being operated and the mode.• In modes other than iPod, the mode switches between“ ”and “ ” each time the [MODE SELECTOR] is pressed.• In the AMP, TUNER and iPod modes, when the remote ID isset, the AVR-2809CI can be used independently even in anenvironment containing multiple DENON amplifiers.Depending on the model and year of manufacture of your equipment,some buttons may not operate.NOTEThe device mode (“ ” or “ ”) cannot be changed while thesetting is being made.[MODE SELECTER][RC SETUP][NUMBER(1 ~ 8)][HOME][ AMP][POWER ON],[POWER OFF]Signal transmissionindicatorOperating DENON Audio Components1 Press [MODE SELECTOR] for the component to beoperated.The indicator for the component to be operated flashes.: AMP / ZONE2 / ZONE3 /ZONE4 / SYSTEM CALL: SIRIUS / XM: TUNER (FM/AM): Satellite receiver / Cable TV: iPod: Blu-ray Disc player /DVD player (Recorder) /CD player (Recorder): VCR / TAPE: TVb The NET/TU ( ) mode is not used on the AVR-2809CI, so usethe learn function to store the signals (vpage 64).b The mode switches each time [AMP] is pressed.GAMP modeH GZONE2 modeH GZONE3 modeHGSYSTEM CALL modeH GZONE4 modeHb The AVR-2809CI cannot be used in the ZONE4 mode.2 Operate the component.b For details, refer to the component’s operating instructions.• [HOME] is used to return to the AMP mode (AMP, ZONE2, ZONE3,ZONE4 or SYSTEM CALL) when in any mode other than AMP.• In ZONE2, ZONE3 and ZONE4 modes, you can switch the main zonepower on or off by pressing [POWER ON] or [POWER OFF].PresettingThe included main remote control unit can be preset to operatedevices of various brands.1 Press [MODE SELECTOR] for the device you want topreset.2 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice.3 Press [NUMBER (1 ~ 8)] and input the 5-digit numberof the brand of the component to be preset. Thenumbers are shown in the Preset Code Table (vEndof this manual).When the code is registered, the signal transmission indicatorflashes twice.When the preset code is transmitted, the mode indicator for thecomponent to which that code belongs flashes.b The input mode is canceled if no button is operated for 10seconds.Some brands have more than one preset code. If the component doesnot operate, try inputting a different code.Operating Preset Components1 Press [MODE SELECTOR] for the component to beoperated.The mode indicator of the device to be operated flashes.2 Operate the component.b For details, refer to the component’s operating instructions.Remote Control