Denon AVR-3310 Owner's Manual

Also see for AVR-3310: Service manual Service manual

Contents

Denon AVR-3310 Owner's Manual Manual pdf 27 page image

Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHNOTEInsert the AC plugs securely. Incomplete connections could causenoise.Only use the AC outlet to plug in audio equipment. Do not usethem as power supplies for hairdryers or anything other than audioequipment.••Wait until all connections have been completed before connecting thepower cord.To household poweroutlet(AC 230 V, 50 Hz)Power cord(included)Connection to the AC outletThis outlet supply power to externalaudio equipment.Audio equipment with a total powerconsumption of 100 W (0.43 A) can beconnected.The power supply turns on and offtogether with . Whenset to “ON”, power is supplied fromthe outlet. When set to “STANDBY”,no power is supplied.•••Connecting the Power Cord Once Connections areCompleted1 Press .The power indicator lights red and the power is set to thestandby mode.2 Press [ON/SOURCE] or .The power indicator flashes green and the power turns on.Also press [INPUT SOURCE SELECT] or QUICK SELECT when instandby mode, the power turns on.When [INPUT SOURCE SELECT] has been pressed, the inputsource set with the [INPUT SOURCE SELECT] is set. If a QUICKSELECT has been pressed, the input source stored in the memoryfor the quick select function is set (vpage 77 “Saving FrequentlyUsed Settings (Quick Select Function)”).bNOTEPower continues to be supplied to some of the circuitry even whenthe power is in the standby mode. When leaving home for longperiods of time or when traveling, either press to turn offthe power, or unplug the power cord from the power outlet.When using ZONE2 or ZONE3, it is possible to turn the power forthe MAIN ZONE only on or off by pressing [MAIN ON] or [MAINOFF].••1 Press [OFF] or .The power is set to the standby mode.2 Press .The power indicator turns off, and so does the power.Turning the Power OffTurning the Power OnButton located on both the main unitand the remote control unit BUTTONButton only on the main unit