Denon AVR-3310 Owner's Manual

Also see for AVR-3310: Service manual Service manual

Contents

Denon AVR-3310 Owner's Manual Manual pdf 80 page image

Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHAdjusting the Volume of Groups of Speakers(Fader Function)This function lets you adjust (fade) the sound from all the front (Frontspeaker / Front height speaker / Center speaker) or rear (Surroundspeaker / Surround back speaker) speakers at once.1 Use i to select “Fader”, then select the item to beadjusting using o or p.2 Use o p to adjust the volume of the speakers.(o : front, p: rear)The fader function does not affect the subwoofer.The fader can be adjusted until the volume of the speaker adjustedto the lowest value is –12 dB.••You can adjust the channel level either according to the playbacksources or to suit your taste, as described below.Adjust the Volume of the Different Speakers1 Press [CHANNEL LEVEL].2 Use ui to select the speaker.The speaker that can be set switches each time one of thebuttons is pressed.3 Use o p to adjust the volume.In the case of a subwoofer, press o when it is at “–12 dB” willchange the setting to “OFF”.bWhen a headphone jack is inserted, the headphone channel level canbe adjusted.With this function, you can set the AVR-3310 so that the power isautomatically switched to standby after the set amount of time haspassed.This is convenient for playing sources while going to sleep.When the sleep timer turns the power off in the MAIN ZONE, thepower also turns off in the ZONE2 and ZONE3.To cancel the sleep timerPress [SLEEP] to set “OFF”.The “ ” indicator on the display turns off.nThe sleep timer setting is canceled if the AVR-3310’s power is set tostandby or turned off.Press [SLEEP] and display the time you want to set.The “ ” indicator on the display lights.The time switches as shown below each time [SLEEP] is pressed.•OFF 120 min 90 min60 min30 minuio p QUICK SELECTENTERQUICK SELECTuio pENTER[CHANNELLEVEL]Button located on both the main unitand the remote control unit BUTTONButton only on the main unit