Denon AVR-3310 Owner's Manual

Also see for AVR-3310: Service manual Service manual

Contents

Denon AVR-3310 Owner's Manual Manual pdf 69 page image

Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHSelecting the Surround ModeSurround Playback of Multi-channel Sources(Dolby Digital, DTS, etc.)In the case of standard playback of multi channel sources, the AVR-3310 recognizes the format of the multi-channel audio input signaland automatically operates the appropriate decoder for surroundsound.nInput signal The indication contents of thedisplayDOLBY DIGITAL(other than 2ch) /DOLBY DIGITAL EXDOLBY DIGITALDOLBY DIGITAL EXDOLBY DIGITAL+PLgx CINEMADOLBY DIGITAL+PLgx MUSICDOLBY DIGITAL+PLgz HEIGHTDOLBY DIGITAL Plus (z4)DOLBY DIGITAL+DOLBY DIGITAL+ +EXDOLBY DIGITAL+ + PLgx CINEMADOLBY DIGITAL+ + PLgx MUSICDOLBY DIGITAL+ + PLgz HEIGHTDOLBY TrueHD (z4)DOLBY TrueHDDOLBY TrueHD+EXDOLBY TrueHD+PLgx CINEMADOLBY TrueHD+PLgx MUSICDOLBY TrueHD+PLgz HEIGHTDTS (5.1ch) /DTS-ES Discrete 6.1 /DTS-ES Matrix 6.1 /DTS 96/24DTS SURROUNDDTS+PLgx CINEMADTS+PLgx MUSICDTS+PLgz HEIGHTDTS+NEO:6DTS ES MTRX6.1 (z1)DTS ES DSCRT6.1 (z2)DTS 96/24 (z3)DTS-HD (z4)DTS-HD HI RESDTS-HD MSTRDTS-HD+NEO:6DTS-HD+PLgx CINEMADTS-HD+PLgx MUSICDTS-HD+PLgz HEIGHTDTS EXPRESSPCM (multi ch)MULTI CH INMULTI IN+PLgx CINEMAMULTI IN+PLgx MUSICMULTI IN+PLgz HEIGHTMULTI CH IN 7.1z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1”and the AVR-3310’s “AFDM” setting is set to “ON”z2 : This is displayed when the input signal is “DTS-ES Discrete6.1”.z3 : This is displayed when the input signal is “DTS 96/24”.z4 : When a signal is input, the HD AUDIO indicator lights.For details, see page 94, 95.Displaying the Currently Playing Surround Modee Direct PlaybackIn this mode the signals bypass the tone control circuitry for highquality sound.The sound is output to the same channels as the input signal.Input signal The indication contents of thedisplayAnalog signal /PCM (2ch) /Dolby Digital source /DTS source /Other 2-channel digitalsignalsDIRECTPCM (multi ch)MULTI CH DIRECTMULTI CH DIRECT + Dolby EXMULTI CH DIRECT + PLgx CINEMAMULTI CH DIRECT + PLgx MUSICMULTI CH DIRECT + PLgz HEIGHTMULTI CH DIRECT 7.1For details, see page 95.1 Playing the source (vpage 50).2 Press DIRECT/STEREO to select the “DIRECT”.Displaying the Currently Playing Surround ModeThe desired mode according to the program source and viewingsituation can be selected from among 7 DENON original surroundmodes.1 Playing the source (vpage 50).2 Select the surround mode by pressing DSPSIMULATION.5CH/7CH STEREOROCK ARENAJAZZ CLUBMONO MOVIEVIDEO GAMEMATRIXVIRTUAL: This mode is for enjoying stereo sound from allspeakers.: This mode is for enjoying the atmosphere of alive concert in an arena.: This mode is for enjoying the atmosphere of alive concert in a jazz club.: This mode is for playing monaural movie sourceswith surround sound.: This mode is suited for achieving surround soundwith video games.: This mode lets you add a sense of expansion tostereo music sources.: This mode is for enjoying surround effects usingonly the front speakers or headphones.z : When playing sources recorded in monaural in the “MONOMOVIE” mode, the sound will be off balance with a single channel(left or right), so input to both channels.zDepending on the program source being played, it may not be possibleto achieve a satisfactory surround effect. In this case, try other modesto achieve a sound field suited to your tastes.w Playing in a DENON OriginalSurround ModeNOTEWhen the input signal is DOLBY TrueHD, DOLBY DIGITAL Plus,DTS-HD or DTS EXPRESS, you cannot select DENON original surroundmode.Playback