Getting StartedConnectionsSettingsRemote ControlMulti-zoneInformationTroubleshootingSpecificationsENGLISHuio pENTERMASTER VOLUMEuio pENTER[SEARCH][MUTE]MASTERVOLUME[8,9][6,7][2][1]Button located on both the main unitand the remote control unitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manual[REPEAT][2][1/3][RANDOM][SEARCH]uio p[8][9]ENTERSub remote control unitPHONES jackFrontTo StopDuring playback, either press and holdENTERor press[2].Stopping Playback TemporarilyDuring playback, pressENTER,[1]or[1/3]on the subremote control unit.Press again to resume playback.Fast-forwarding or Fast-reversingDuring playback, press and hold[6](fast-reverse) or[7](fast-forward), or press and holdui.Press.Front AFront BFront A+BNOTEWhen you set to “Custom” with “Front Speaker Setup“ (vpage 35),you cannot operate.Switching the front speakersTo Cue to the Beginning of a TrackDuring playback, either press[8](to search forprevious tracks) or[9](to search for subsequenttracks), or pressui.PlaybackOperations During PlaybackPress[MUTE].The sound is reduced to the level set at “Mute Level” (vpage40).To cancel, press[MUTE]again. Muting can also be canceled byadjusting the master volume.••Plug the headphones into the PHONES jack on the mainunit.The sound from the speakers and pre-out connectors is automaticallycut.NOTETo prevent hearing loss, do not raise the volume level excessivelywhen using headphones.Remove your headphones when performing Audyssey™ Auto Setupor adjusting the speaker volume.••UseMASTER VOLUMEto adjust the volume.When the “Volume Display” setting (vpage 40) is“Relative”GAdjustable rangeH– – ––80.5dB ~ 18.0dBWhen the “Volume Display” setting (vpage 40) is“Absolute”GAdjustable rangeH0.0 ~ 99.0The adjustable range depends on the input signal, the channellevel settings, etc.nnbAdjusting the Master VolumeTurning Off the Sound Temporarily(Muting)Listening with Headphones
