Getting StartedConnectionsSettingsRemote ControlMulti-zoneInformationTroubleshootingSpecificationsENGLISHOther Operations and Convenient FunctionsButton located on both the main unitand the remote control unitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualOther OperationsNOTERecordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.Input sources for which “Delete” is selected at “Source Delete”(vpage 40) cannot be selected.••To cancel, press, then turnSELECT>until “ZONE2 Source” is displayed.Make a test recording before starting the actual recording.Signals are only output to the analog REC OUT connectors whenthe digital signals input to the digital input connectors (OPTICAL/COAXIAL) are PCM (2-channel) signals.Digital audio signals input to the HDMI connectors are not outputto the REC OUT connectors, so connect using the OPTICAL orCOAXIAL connectors.Sources selected with the REC OUT mode are output from ZONE2as well.In the REC OUT mode, the remote control unit’s ZONE2 modebuttons cannot be operated.••••••You can listen to one program source while recording a differentprogram source.1Press.“ZONE2 Source” is shown on the display.2Turnuntil “RECOUT Source”is displayed.The “” indicator lights.ZONE2 SourceZONE2 TUNERZONE2 NET/USB····RECOUT NET/USBRECOUT V.AUXRECOUT Source····3Turnto choose the input sourceto be recorded.4Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage52).bb5Start recording.For operating instructions, refer to the respective equipment’soperating instructions.bRecording on an External Device(REC OUT mode)Playback
