Denon AVR-985 Operating Instructions Manual

Also see for AVR 2805 - AV Receiver: Control protocol Manual

Contents

Denon AVR-985 Operating Instructions Manual Manual pdf 10 page image

10Connecting the antenna terminals142 3DIRECTION OFBROADCASTINGSTATION75 Ω/ohmsCOAXIALCABLEFM ANTENNAFM INDOORANTENNA(Supplied)AM LOOPANTENNA(Supplied)AM OUTDOORANTENNAGROUNDAM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line. Bend in the reversedirection.a. With the antennaon top any stablesurface.b. With the antennaattached to a wall.MountInstallation holeMount on wall, etc.• An F-type FM antenna cable plug can be connected directly.Connection of AM antennas1. Push the lever. 2. Insert the conductor. 3. Return the lever.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which providesguidelines for proper grounding and, in particular, specifiesthat the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entryas practical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnectthe AM loop antenna.• Make sure AM loop antenna lead terminals do not touchmetal parts of the panel.LRLRR LLRLRR LConnecting the external input (EXT. IN) jacks• These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channeldecoder, such as a DVD Audio player, a multi-channel SACD player, or other future multi-channel sound format decoder.• When making connections, also refer to the operating instructions of the other components.Decoder with 8- or 6-channelanalog outputFrontSurroundSurround backSubwooferCenterFor instructions on playback using the external input (EXT. IN)jacks. (See page 61)