Denon AVR-985 Operating Instructions Manual

Also see for AVR 2805 - AV Receiver: Control protocol Manual

Contents

Denon AVR-985 Operating Instructions Manual Manual pdf 55 page image

55(3) Using the system call function1 Press the button at which the system call signals have been stored.• The stored signals are transmitted successively.Punch Through(1) Punch through buttonButtons used in the CD, CDR/MD, TAPE, DVD/VDP, and VCRmodes can be assigned to the buttons shown on the diagram atthe right which are not normally used in the TV and DBS/CABLEmodes.For example, when the CD mode is set to the punch through modein the TV mode, the CD mode’s PLAY, STOP, MANUAL SEARCH,AUTO SEARCH, PAUSE and DISC SKIP buttons’ signals are sentin the TV mode.(2) Making the punch through setting12Press the power ON/SOURCE button andthe OFF button at the same time.• The LEARNED/TX indicator flashes.Press the 1 (play) button.• TV and DBS/CABLE mode buttons andLEARNED/TX indicator flash.132(1)143 Press the mode button of the equipmentfor which Punch Through is to be set.• The CD, CDR/MD, TAPE, DVD/VDP,and VCR mode buttons andLEARNED/TX indicator will flash.4 Press the mode button of the equipment that is to bepunched through.• The mode button that was set will light.