Denon AVR-985 Operating Instructions Manual

Also see for AVR 2805 - AV Receiver: Control protocol Manual

Contents

Denon AVR-985 Operating Instructions Manual Manual pdf 42 page image

424-3 Setting the Auto Surround ModeThe surround mode used at last for the three types of input signals shown below is stored in the memory, and the signal is automatically playedwith that surround mode the next time it is input.Note that the surround mode setting is also stored separately for the different input sources.q Analog and PCM 2-channel signals (STEREO)w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLIIx cinema)e Multi-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)Default settings are indicated in ( ).During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.1 Select “Auto Surround Mode” at the AdvancedPlayback Menu.(Remote control unit) A u t o S u r r o u n d* A d v a n c e d P l a y(Remote control unit)2 Press the ENTER button.Display the Auto Surround Mode screen.3 Select “ON” if you want to use the auto surroundmode, “OFF” if you do not want to use it.4 Enter the setting.The Advanced Playback Menu reappears.(Remote control unit) O N / O F F : O N* A u t o S u r r o u n d(Remote control unit)Setting the Option Setup1 Select “Option Setup” at the System Setup Menu.2 Display the Option Setup Menu Screen.(Remote control unit)O p t i o n S e t u p* S y s t e m S e t u p(Remote control unit)5Contents stored in the auto surround mode can bechecked with the on-screen display.(Remote control unit)