Denon AVR-985 Operating Instructions Manual

Also see for AVR 2805 - AV Receiver: Control protocol Manual

Contents

Denon AVR-985 Operating Instructions Manual Manual pdf 34 page image

347 Enter the setting.The “Channel Level” screen reappears.To cancel the settings, press the CURSOR down to select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settingsagain.When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affectall surround modes. Consider this mode a Master Channel Level adjustment mode.After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes andadjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode,your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within eachsurround mode. (See page 68)You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT, STEREO, DOLBY/DTS SURROUND,5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME,MATRIX and VIRTUAL.(Remote control unit)2-4 Setting the crossover frequency1 Select the “Crossover Frequency” at the Speaker Setup Menu.• Set the crossover frequency mode according to the speaker system being used.Select the frequency.(Remote control unit)(Remote control unit)C r o s s o v e r F r e q .* S p e a k e r S e t u p4 Enter the setting.The Speaker Setup Menu reappears.(Remote control unit)32 Display the Crossover Frequency screen.(Remote control unit)8 0 H z* C r o s s o v e r F r e q• 40 / 60 / 80 / 100 / 120 / 150 / 200 / 250 Hz can beselected.NOTE:• When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.