125AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettings2 Center WidthDistributes the dialogue output from the center channel to left and rightchannels and widens the sound image in the front.0 – 7 (Default : 3)%• You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.• The smaller the value, the more dialogue is concentrated on the centerchannel. The larger the value, the more dialogue is distributed to front left andright channels, and the more the sound image widens in the front.2 Delay TimeAdjust the audio delay time against video to extend the sound fieldimage.0ms – 300ms (Default : 30ms)%• You can set this when the sound mode is “MATRIX”.2 Effect LevelAdjust the sound effect level of the current sound mode.1 – 15 (Default : 10)%• Set to a lower level if the positioning and sense of phase of the surroundsignals seems unnatural.2 Room SizeDetermine size of acoustic environment. You can set this when thesound mode is one of the original sound modes.Small : Simulate acoustics of a small room.Medium small : Simulate acoustics of a medium-small room.Medium (Default) : Simulate acoustics of a medium room.Medium large : Simulate acoustics of a medium-large room.Large : Simulate acoustics of a large room.%• “Room Size” does not indicate the size of the room in which sources areplayed.2 Height GainControl the front height channel volume.Low : Reduce the front height channel volume.Normal (Default) : Front height channel sound is output with standardsound volume.High : Increase the front height channel volume.%• You can set this in the “PLgz” sound mode or when using the PLgz decoder.2 Set DefaultsThe “Surround Parameter” settings are returned to the default settings.
