150AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsManual SetupPerform when setting the speakers manually or when changing settingsmade in Audyssey® Setup.• If you change the speaker settings after performing Audyssey® Setup, itwill not be possible to select Audyssey MultEQ® XT, Audyssey DynamicEQ® and Audyssey Dynamic Volume® (vpage 128, 129).• “Manual Setup” can be used without changing the settings. Please setif necessary.Amp AssignSelect power amplifier usage method to match your speaker system.2 Assign ModeSet the assignment mode.Surround Back (Default) : Setting for 7.1-channel playback usingsurround back speakers.ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2and output the audio in stereo.Bi-AMP : Setting to use the front speakers via the bi-amp connection.Front B : Setting to use the second set of front speakers for playback.You can switch the front speakers A and B to be used forplayback in accordance with the 2-channel playback or multi-channel playback mode. When you select this Front B setting,also perform the “Front Speaker Setup” (vpage 155)procedure.Front Height : Setting for 7.1-channel playback using front heightspeakers.
