162AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsAuto StandbyWhen you do not perform any operation on this unit with no audio or videoinput for a specified time, this unit automatically enters the standby mode.Before it enters the standby mode, “Auto Standby” is displayed on thedisplay of this unit and the menu screen.60 min : The unit goes into standby after 60 minutes.30 min (Default) : The unit goes into standby after 30 minutes.Off : The unit does not go into standby automatically.Front DisplayMakes settings related to the display on this unit.2 DimmerAdjust the display brightness of this unit.Bright (Default) : Normal display brightness.Dim : Reduced display brightness.Dark : Very low display brightness.Off : Turns the display off.%• You can also adjust the display by turning DIMMER on the main unit.InformationShow information about receiver settings, input signals, etc.2 AudioShow the audio information for MAIN ZONE.Sound Mode : The currently set sound mode.Input Signal : The input signal type.Format : The number of input signal channels (presence of front,surround, LFE).Sample Rate : The input signal’s sampling frequency.Offset : The dialogue normalization correction value.Flag : This is displayed when inputting signals including a surroundback channel. “MATRIX” is displayed with Dolby Digital EXand DTS-ES Matrix signals, “DISCRETE” with DTS-ES Discretesignals.Dialogue normalization functionThis function is automatically activated when playing Dolby Digital,Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.It automatically corrects the standard signal level for individualprogram sources.The correction value can be checked using the STATUS on the mainunit.Offset: - 4dBThe figure is the corrected value. This cannot be changed.
