195TipsSettingsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteAppendixz1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.z2 Audio is output when “Subwoofer Mode” (vpage 155) in the menu is set to “LFE+Main”.z3 This setting is unavailable when the set sound mode name contains “+PLg Music”.z4 This setting is possible when the sound mode is “Cinema” mode.z5 This item can be selected when a Dolby TrueHD signal is played.z6 This item can be selected when a Dolby Digital or DTS signal is played.z7 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.z8 This setting is available when the set sound mode name contains “+PLgz”.z9 This item cannot be set when “Dynamic EQ” (vpage 128) is set to “On”.z10 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.z11 This item cannot be set when “MultEQ® XT” (vpage 128) is set to “Off” or “Graphic EQ”.z12 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.z13 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
