40AppendixTipsSettingsPlaybackContentsFront panel Display Rear panel IndexRemoteConnections%• When using this unit, we recommend you use a router equipped with the followingfunctions:• Built-in DHCP serverThis function automatically assigns IP addresses on the LAN.• Built-in 100BASE-TX switchWhen connecting multiple devices, we recommend a switching hub with a speedof 100 Mbps or greater.• Use only a shielded STP or ScTP LAN cable which is easily available at electronicsstores (CAT-5 or greater recommended).• The normal shielded-type LAN cable is recommended. If a flat-type cable orunshielded-type cable is used, other devices could be affected by noise.NOTE• The types of routers that can be used depend on the ISP. Contact your ISP or acomputer shop for details.• This unit is not compatible with PPPoE. A PPPoE-compatible router is required ifyou have a contract for a type of line set by PPPoE.• Do not connect an NETWORK connector directly to the LAN port/ Ethernetconnector on your computer.Connecting the power cordAfter completing all the connections, insert the power plug into the poweroutlet.To household power outlet(AC 230 V, 50/60 Hz)Power cord (supplied)
