Denon CEOL RCD-N8 Owner's Manual

Also see for CEOL RCD-N8: Service manual

46Web control functionYou can control this unit from a web control screen on a web browser.• This unit and the PC need to be connected to the network properly(vpage 9 “Connecting to a home network (LAN)”) in order touse the web control function.• Depending on the settings of your security-related software, youmay not be able to access this unit from your PC. If this is the case,then change the settings of the security-related software.1 Switch the “Network Control” setting to “On”(vpage 20).2 Check the IP address of this unit with “NetworkInformation”.IP Address[Network information ]192.168.100.19Checking the IP address.3 Start up the web browser.4 Enter the IP address of this unit in browser’s addressbox.For example, if the IP address of this unit is “192.168.100.19”,enter “http://192.168.100.19/”.Please select the menu.news(45)WikipediaYouTubeYahoo! JapanappleBonjourhttp://ceol.local./index.aspNETWORKFIRMWAREqwq Entering the IP address.• By adding this unit’s IP address to the browser’s bookmark, youcan display the web control screen using the bookmark functionthe next time you use the browser. If you are using a DHCPserver and “Network Control” (vpage 20)) is set to “Off”,turning the power on/off changes the IP address.w If you are using the Safari web browser, you can select “Bonjour”and directly access the unit’s web control screen from theoverview section.5 When the top menu is displayed, click on the menuitem you want to operate.Please select the menu.NETWORKFIRMWAREere Click when you setup network settings. vGExample 1Hr Click when you update firmware (vpage 15)