4About the remote controln Inserting the batteriesq Remove the remotecontrol’s rear cover.w Set two R03/AAA batteries inthe battery compartment in theindicated direction.e Put the rear cover back on.NOTE• Insert the specified batteries in the remote control.• Replace the batteries with new ones if the set does not operateeven when the remote control is operated close to the unit. (Thesupplied batteries are only for verifying operation. Replace themwith new batteries at an early date.)• When inserting the batteries, be sure to do so in the proper direction,following the q and w marks in the battery compartment.• To prevent damage or leakage of battery fluid:• Do not use a new battery together with an old one.• Do not use two different types of batteries.• Do not attempt to charge dry batteries.• Do not short-circuit, disassemble, heat or dispose of batteries inflames.• Do not keep the battery in a place exposed to direct sunlight or inplaces with extremely high temperatures, such as near a heater.• If the battery fluid should leak, carefully wipe the fluid off the insideof the battery compartment and insert new batteries.• Remove the batteries from the remote control if it will not be in usefor long periods.• Used batteries should be disposed of in accordance with the localregulations regarding battery disposal.• The remote control may function improperly if rechargeable batteriesare used.n Operating range of the remote controlPoint the remote control at the remote sensor when operating it.30° 30°Approx. 7 mNOTE• The set may function improperly or the remote control may notoperate if the remote control sensor is exposed to direct sunlight,strong artificial light from an inverter type fluorescent lamp orinfrared light.• When using 3D video devices that transmit radio communicationsignals (such as infrared signals etc) between the various units(such as the monitor, 3D glasses, 3D transmitter unit etc), theremote control may not operate due to interference from thoseradio communication signals. If this occurs, adjust the direction anddistance of the 3D communication for each unit, and check that theremote control operation is not affected by these signals.Denon Remote AppDenon Remote App is a unique application developed for the iPhone,iPod touch and Android smartphone. This application enables you tocontrol DENON network devices that are connected to your homenetwork. Install the App onto your iPhone, iPod touch or Androidsmartphone to control this device.CEOL18:46PlayerViewFavorites Internet Radio Music Server USBTuner Digital In CD iPod PlayerInternet Radio15iPod• Bidirectional communication is performed.• The Denon Remote App can be downloaded for free from the AppleApp Store or Google Play store.Remote operation